Richdel Valves

How to remove a valve watering richdel, when I turn the body of it, it will not unscrew, it just turns up.

If the valve itself has gone bad, then you can actually replace it without haveing to remove it.
richdells are now called Irritrol valves.
they are not so difficult to replace the courage and the upper part of the valve.
if you can find the same valve on the Internet, or a landscape store, simply remove and replace the old with the interior parts of the new valve, and replace the top piece with solenoid as well.
if you can not find the same kind of valve, just dig a hole in Nice and cut the pipes and replumb.
thats pretty easy too. the more space you have on the pipe to be cut, the easier it will go.
but now richdells Irritrol.
parties are the same, just have a different label.
Ive seen the last richdells more than 20 years if
good luck and hope this helps

Is this valve you try to delete or the sprinkler head?

if its the valve, there will be two pipes, one and the other out, just relax the wire at the end of the end of the valve,
If his own jets, there should be a hose through the (swing joint) just type the whole body and screw (make sure to enter the sprinkler whole and not just the top, you can having to dig around it